Roborock S7 is an advanced robotic vacuum cleaner that offers a unique feature of mopping. With the help of this feature, the Roborock S7 can not only clean your floors but also mop them to keep them tidy. Mopping is especially helpful for homes with hard floors that require regular cleaning.
If you are a Roborock S7 owner and want to know how to install mop on it, then this article is for you. In this step-by-step guide, we will show you how to install the mop on your Roborock S7 so that you can start using this feature and keep your floors sparkling clean. Whether you are a tech-savvy homeowner or someone with no prior experience, you will find this guide easy to follow and implement.
Gather the Tools and Supplies: What You’ll Need to Install a Mop on Your Roborock S7
Subheading 1: Gather the Tools and Supplies: What You’ll Need to Install a Mop on Your Roborock S7
Before you start installing a mop on your Roborock S7, you need to make sure that you have all the necessary tools and supplies. Here’s a list of the things you’ll need:
1. A mop: You will need a compatible mop that fits the Roborock S7. You can purchase the mop from the store where you bought the Roborock S7 or online.
2. Water tank kit: You will also need a water tank kit that comes with the mop. The water tank kit will include a water tank, a mop tray, and a mop pad.
3. Screwdriver: You’ll need a small screwdriver to attach the water tank kit to your Roborock S7.
4. Water: Finally, you will need water to fill the tank. Make sure you use clean water and not any cleaning solutions, as they may damage your Roborock S7 mop.
Step 1: Detach the Dustbin and Main Brush
In order to install the mop on your Roborock S7, you will first need to detach the dustbin and main brush from the robot. This is a crucial step that needs to be done with care to avoid damaging any of the parts.
To detach the dustbin, open the lid on the top of the robot and firmly pull the dustbin out of the robot. It should come out easily with a bit of pressure. Once it is detached, you can remove the filter from the dustbin and rinse it under water.
Next, you will need to remove the main brush by firmly pulling on both ends until it comes out of its socket. Make sure to clean the brush thoroughly before reattaching it later. With these two components detached, your Roborock S7 is now ready for the mop installation process.
Step 2: Attach the Water Tank and Mopping Cloth
Step 2: Attach the Water Tank and Mopping Cloth
Once you have assembled the Roborock S7 and charged it, it’s time to attach the water tank and mopping cloth. Firstly, remove the dustbin from the robot and place the water tank on the dustbin. Ensure that the tank’s seal is firmly in place to prevent any leaks during operation. Once this is done, click the mopping cloth onto the back of the water tank.
It is important to make sure the water tank is filled with water before attaching it to the robot. Use a measuring cup to fill the tank up to 290ml. Ensure you use only clean water without any detergents or additives as they can damage the water tank and the mopping cloth. The mopping cloth should be changed after each use to ensure the best cleaning results. With the water tank and mopping cloth securely in place, you are now ready to begin mopping and cleaning your floors with the Roborock S7.
Step 3: Install the Mop Bracket and Connect the Water Pump
Step 3: Install the Mop Bracket and Connect the Water Pump
After inserting the mop cloth into the designated slot, the next step is to install the mop bracket. The mop bracket needs to be attached properly to the bottom of the robot vacuum, which is quite simple. Turn the Roborock S7 upside down and observe the point where the mop bracket is supposed to be placed. Then, use the provided screws and screwdriver to attach the mop bracket.
The final step in installing the mop on your Roborock S7 is to connect the water pump. Fill up the water tank provided with the vacuum, and attach the water hose to the water pump located beside the mop bracket. Ensure that the water hose is properly connected to the water pump nozzle, as an improper connection may result in water spillage. After attaching the water pump to the vacuum, you can adjust the water flow rate on the Roborock S7 app. Congratulations! You have successfully installed the mop onto your Roborock S7 vacuum cleaner.
Step 4: Fill the Water Tank and Test the Mopping Feature
Once you have attached the mop to your Roborock S7, you need to fill the water tank before you can start mopping. The Roborock S7 comes with a 300ml water tank that needs to be filled before each mopping session. To fill the water tank, remove it from the device and pull the plug to open it. Fill the tank with clean water up to the water level line labeled on the side of the tank. Then, reattach the water tank to the device.
To test the mopping feature, turn on the Roborock S7 and select the mopping option from the menu. The robot will start mopping the floor as per the settings you have chosen. Check the floor after a few minutes to see if it is getting cleaned properly or not. You can adjust the water flow rate if needed. The Roborock S7 has different levels of mopping, from low to high. Choose the level that suits your mopping needs. With these simple steps, you can enable the mopping feature on your Roborock S7 and ensure that your floors are clean and spotless.
Tips and Tricks for Keeping Your Roborock S7 Mop in Top Condition
Keeping your Roborock S7 mop in top condition is crucial to ensure that it continues to do its job effectively. Here are a few tips and tricks to help you maintain your Roborock S7 mop:
Firstly, it is important to clean the mop after each use. This can be done by removing the mop pad and rinsing it thoroughly under running water. You can also use a mild detergent to scrub away any stubborn stains. Make sure to let the mop pad dry completely before reattaching it to the Roborock S7.
Secondly, regularly check the water tank and refill it as necessary. It is recommended that you use only clean water and avoid using any harsh chemicals or cleaning agents. Also, ensure that you replace the mop pad every few months to prevent any build-up of dirt or bacteria. By following these simple maintenance tips, you can enjoy clean and spotless floors for years to come.
Conclusion: Enjoy a Cleaner Home with Your Newly Installed Roborock S7 Mopping System.
In conclusion, with the installation of the Roborock S7 mopping system, you can enjoy your clean home without having to spend hours on cleaning. The Roborock S7 is a top-rated vacuum and mopping robot, offering a unique mopping feature that cleans your floors with ease. The installation process is simple and straightforward, and you do not need any technical skills or expertise to do it.
With the Roborock S7, you can say goodbye to the traditional mopping methods and welcome a new level of convenience to your life. The mopping system is not only effective but also easy to use, making it the perfect solution for busy individuals who want to maintain a clean and hygienic home without putting in too much effort. In summary, invest in the Roborock S7 today, and enjoy a cleaner, fresher, and more comfortable home every day.
Conclusion
Installing a mop on your Roborock S7 is a simple process once you know the steps. The first step is to ensure that you have the correct mop and compatible water tank for your Roborock S7. Then, you will need to remove the current brush module and replace it with the mop module. It is essential to adjust the mop module to the appropriate height to avoid damage to your floor or the bot.
In conclusion, installing a mop on your Roborock S7 is easy if you follow the instructions mentioned above. You will soon have a bot that does not only vacuum but also mops your floors to perfection. Remember to clean your mop regularly using soap and water to avoid build-up and keep your floors clean. With these simple steps, you will have a spotless home effortlessly!